Operator's Manual
2
All Rights Reserved
Printed in the USA
2002 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Contents
Page
Specifications 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Specifications 2. . . . . . . . . . . . . . . . . . . . .
Adjusting Dethatching Unit 3. . . . . . . . . . . . . . . . . . . .
Adjusting Reel Blades for Positive Setting
(Above Ground) 3. . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Reel Blades For Negative Setting
(Below Ground) 3. . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Grass Shield 3. . . . . . . . . . . . . . . . . . . . .
Adjusting Front Roller Scraper 4. . . . . . . . . . . . . .
Adjusting Rear Wheel Scrapers 4. . . . . . . . . . . . . .
Installing Dethatcher Units 4. . . . . . . . . . . . . . . . . .
Operation 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Training Period 6. . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Tips 6. . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
Adjust Carrier Frame Rollers 6. . . . . . . . . . . . . . . .
Checking/Adjusting Reel Circuit Relief
Valve Pressure 6. . . . . . . . . . . . . . . . . . . . . . . . . .
A. Precautions for Hydraulic Testing 6. . . . . . . . . .
B. Procedure for Manifold Relief
Valve Pressure Check: 7. . . . . . . . . . . . . . . . . . . .
C. Adjust Manifold Relief Valve 7. . . . . . . . . . . . .
Optional Blade Configurations 8. . . . . . . . . . . . . . .
Lubrication 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing Reel 10. . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing Blades From Shaft 10. . . . . . . . . . . . . . .
Installing Dethatcher Blades 11. . . . . . . . . . . . . . . . .
Assemble Reel To Frame 11. . . . . . . . . . . . . . . . . . .
Specifications
Note: Specifications and design subject to change without notice.
General Specifications
Reel Construction Blades and spacers bolted to hex shaft. Blades carbide tipped.
Height of Dethatching
Range
1/4” below ground level to 1/4” above ground level.
Reel Diameter 5 in.
Power Hydraulic motor splined to reel shaft.
Reel Bearings
Self aligning, roller ball type with cast housing and eccentric collar lock with
setscrew.
Roller Adjustment
Front Roller–Fixed
Rear Wheels–Screw adjustable with bolt clamp lock.
Note: Rear wheels and shaft can be replaced with a Front Roller, Part No. 95–5943. (Roller Scraper, Part No. 95–1600).