Installation Instructions
Table Of Contents
- .
- 1 Preparing the Machine
- 2 Gathering the Tools Required for Setup
- 3 Determining the Setup
- 4 Preparing the Cutting Unit
- 5 Installing the Weight Bracket and the Groomer Drive Box
- 6 Installing the Idler Assembly
- 7 Installing the HOC Bracket Assemblies and the Front Roller
- 8 Installing the Groomer Assembly and Optional Broomer Kit
- 9 Installing the Angled Fitting
- NO TITLE
- NO TITLE
7
InstallingtheHOCBracket
AssembliesandtheFront
Roller
Partsneededforthisprocedure:
5
LeftHOCbracketassembly
5
RightHOCbracketassembly
10Adjusterpin
10
Cotterpin
5
Outercover
5
Hex-socket,button-headscrew(5/16x1/2inch)
Procedure
1.LooselyinstalltheleftandrightHOCbracket
assembliesandthefrontrollerassemblytothe
cutting-unitsideplatesusingthepreviously
removedcarriageboltsandlocknuts(Figure9).
g232389
Figure9
1.RightHOCbracket
assembly
4.Washers
2.Frontrollerassembly
5.Carriageboltandlocknut
3.LeftHOCbracket
assembly
2.Onthegroomerboxside,slidetheadjuster-arm
rodoftheHOCbracketintothegaponthe
groomerdriveboxandsecureitwithanadjuster
pinandcotterpinasshowninFigure10.
Note:Theadjusterpinmustbeinstalledfrom
theinsideofthemachinetotheoutsideofthe
machine.
g232400
Figure10
1.Adjusterpin
3.Cotterpin
2.Adjuster-armrod
4.Groomerdrivebox
3.Ontheidlerassemblyside,alignthe
adjuster-armrodoftheHOCbracketwiththe
adjustercollarontheidlerassemblyandsecure
itwithanadjusterpinandcotterpin(Figure11).
g232388
Figure11
1.Adjusterpin
4.Cotterpin
2.Adjuster-armrod5.Idlerassembly
3.Adjustercollar
4.Tightenthecarriageboltsandlocknutssecuring
theHOCbracketassembliestothesideplates
(Figure12).
6