Installation Instructions

g020390
Figure27
1.Belt
2.Deep-wellsocket(9/16
inch)
Important:Ensurethattheribsonthebelt
areproperlyseatedinthegroovesineach
pulleyandthatthebeltisinthecenterofthe
idlerpulley.
9.Checkthepulleyalignmentagainandrepeat
thisprocedureifnecessary.
RestrainingtheReel
WARNING
Thecuttingreelbladesaresharpandcapable
ofamputatinghandsandfeet.
•Keepyourhandsandfeetoutsideofthe
reel.
•Ensurethatthereelisrestrainedbefore
servicingit.
RestrainingtheReelforRemoving
ThreadedInserts
1.Loosentheshield-boltontheleftsideofthe
cuttingunitandraisetherearshield(Figure28).
2.Insertalong-handledprybar(recommended
3/8"x12"withscrewdriverhandle)throughthe
backofthecuttingreel,closesttothesideofthe
cuttingunitthatyouwillbetorquing(Figure28).
3.Placetheprybaragainsttheweldsideofthe
reelsupportplate(Figure28).
Note:Inserttheprybarbetweenthetopofthe
reelshaftandthebacksof2reelbladessothat
thereelwillnotmove.
Important:Donotcontactthecuttingedge
ofanybladeswiththeprybar;thismay
damagethecuttingedgeand/orcauseahigh
blade.
Important:Theinsertontheleftsideof
thecuttingunithasleft-handthreads.The
insertontherightsideofthecuttingunithas
right-handthreads.
12