Operator's Manual

4
Specifications
Reel construction Blades and spacers bolted to square shaft
Dethatching range Up to 1/4 in. (6mm) deep blade penetration
Blade diameter 7–1/4 in. (18.4cm)
Power Hydraulic motor splined to reel shaft
Reel bearings Self aligning, roller ball type with cast housing
Roller adjustment Front roller fixed. Rear roller adjustable
Important Traction unit must be equipped with 27” Lift Arms, Model 03220 to accommodate 27” verticutting reels
Set–Up
Note: Determine the left and right sides of the machine from the normal operating position.
Loose Parts
Note: Use this chart as a checklist to ensure that all parts have been received. Without these parts, total setup cannot be
completed.
Description Qty. Use
O–ring 1 For use with reel motor bearing housing
CE Decal 1 Affix to cutting unit for CE.
Operator’s manual 1 Read before operating.
Parts catalog 1
Registration Card 1 Fill out and return to Toro