Operator's Manual

Issued: 03.03.11 Approved: Mod. No. 5059950 Sheet 1 of 4 Part No. 111-4148 (A)
Spellbrook, Bishop’s Stortford, Herts. CM23 4BU, England.
Telephone: [phone] Fax: [phone]
E-mail: [e-mail] / [e-mail] Web: www.toro.com / www.hayter.co.uk
The oating head kit is designed to provide a fully oating cutterhead conguration when tted to the TM5490 machines
respectively. The way in which these units are operated and maintained will have a profound effect on performance and
reliability. This can only be tted if a front roller kit is tted.
This instruction sheet should be regarded as part of the machine, as it gives essential information regarding machine
safety and assembly.
For all other information refer to your Operator’s Manual and Parts List.
In pursuit of continuous product development, TORO reserve the right to alter specications without notice.
Left and Right: Throughout this instruction sheet refers to the mower when looking in the direction of forward travel.
FITTING INSTRUCTIONS & PARTS LIST
FLOATING HEAD KIT
Models 02824
For TM5490
Models 02700
ORIGINAL VERSION (EN)
Serial No. From 311000001
INTRODUCTION
CONTENTS
Contents Page No.
Introduction 1
Safety Precautions 2
Specications 2
Assembly 3
Maintenance 4
Warranty 4
RELEASED Version ©Toro 2011-2011