Maintenance Manual

35
Outputs
Config > Advanced > Outputs
This page is used to see the logic of the signals that will activate the Outputs on the IO board and to test those
Outputs. The TB6 output can also be configured from this page.
Electric card outputs:
- SV
- ST
- AB
- CR4
- CR5
- TB1 (Motor Run)
- TB2 (Power Available)
- TB3 (Normal Phase Reversal)
- TB4 (Pump Room Alarm)
- TB5 (Motor Trouble)
- TB6 (Configurable)
Pressing on an Output will lead to this page:
The first box from the top is used to change the name of the Output. For the output's logic, a combination of 5 digital
inputs can be selected. Each input can be an alarm or a signal from a list and can be inverted by pressing the