Operating Guide

6
When The Machine Is Delivered
1 Check the carton for signs of shipping damage.
2 Remove machine from the carton and look for damage.
If the machine is damaged, notify the carrier immediately and request an inspection. Be sure to keep
the carton, packing inserts, packing lists and carrier’s receipt until the inspector has veried your
claim.
Before Operating Machine
Read this manual completely before attempting to operate machine. This manual has important
information for the use and safe operation of the machine. Keep this manual on le and handy. This
machine will provide years of satisfactory service if operated and maintained according to recommen-
dations in the manual. If additional information is needed, please contact your local distributor or write
to:
TORNADO INDUSTRIES
3101 WICHITA COURT
FORT WORTH, TX 76140
PHONE 800-VACUUMS
FAX[phone]
www.tornadovac.com
Operation
Machine is shipped complete and ready for use.
1 Plug machine cord into properly grounded wall outlet or ground-
ed extension cord.
2 Position as necessary. See Application Chart.
- 0° for surface air ow. Also can be inserted under the edges of
carpets.
- 30° for walls, furnishings and ventilation.
- 90° for ceilings and ventilation such as in factories or warehous-
es.
3 Turn switch and select desired speed setting- LOW - MEDIUM -
HIGH
Use low or medium speed for applications where high air volume is
not recommended.
Use high speed for faster drying of surfaces and carpets.
4 When complete, turn switch to OFF position.
5 Wrap cord around holder.