Product Manual
2
SAFETY INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this product
before using. The owner and/or operator of this equipment shall have an understanding of safe use/operating
procedures before attempting to use. The owner and/or operator shall be aware that the use of this product may require
special skills and knowledge. Instructions and safety information shall be conveyed in the operator’s native language
before use of this device is authorized. If any doubt exists as to the safe and proper use of this product as outlined in this
factory authorized manual, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. If the
product appears damaged in any way, operates abnormally or is missing parts, it should be removed from service
immediately and the manufacturer notied. If you suspect that the product was subjected to a shock load (a load
suddenly dropped unexpectedly upon it), immediately discontinue use until product has been checked by a factory
authorized service center (contact distributor or manufacturer for list of Authorized Service Centers). It is recommended
that an annual inspection be done by qualied personnel. Labels and owner’s manuals are available from manufacturer.
WARNING!
1. READ, STUDY AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS PRIOR TO USE.
2. USE ONLY ON HARD LEVEL SURFACE.
3. OVERLOADING RACK CAN CAUSE PRODUCT TO DAMAGE ITSELF OR PARTS AND OR CAUSE TIPPING, BENDING,
DEFLECTION, MISUSE, DAMAGE TO PRODUCT OR OTHER ITEMS. DO NOT OVERLOAD PRODUCT PERSONAL
INJURY AND/OR PROPERTY DAMAGE COULD OCCUR.
4. IT IS RECOMMENDED THAT 2 PERSONS ASSEMBLE PRODUCT.
5. NO ALTERATIONS SHALL BE MADE TO THIS PRODUCT.
6. ONLY ATTACHMENTS AND/OR ADAPTERS SUPPLIED BY THE MANUFACTURER SHALL BE USED.
7. FAILURE TO HEED THESE WARNINGS MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE.
PRODUCT DESCRIPTION
The parts cart is ideal for temporary storage and transfer of parts. Features two adjustable shelves, four structural
part brackets designed for hanging parts, four swivel casters and a unique outrigger slide-out stabalizer to help
when storing or moving heavy parts.
ASSEMBLY INSTRUCTIONS
ASSEMBLY PARTS DIAGRAM IS ON PAGE 6.
1. ATTACH #2 TO THE BOTTOM OF #1.
ATTACH NON-LOCKING SWIVEL CASTERS TO ONE SIDE NARROW SIDE OF THE BOTTOM SHELF.
ATTACH LOCKING SWIVEL CASTERS TO THE OPPOSITE NARROW SIDE OF THE BOTTOM SHELF.
IMAGES (A TO I)
C
A B