User Manual

- 39 -
18.1. Storing a Tare Value Manually
1. Press the MENU key, when the option “Tare” is displayed press the T key, and then select the option “Tar
Set ” by press the T key once again.
2. The scale will begin to display tare locations. Locations marked with a dot in the upper left corner of the
LED have a stored tare value assigned. To select a tare location or overwrite a current location press the T
key when a desired location is displayed, and then select the option “Manual ” by press the T key once
again.
3. A dashed line will be displayed indicating to manually enter the Tare value. To manually enter tare value,
use the following keys: the C key to increment a digit, the T key to accept and go to the next digit, the
key to insert a decimal, and the MENU key to accept the entire setting.
To increment a digit To accept and go to
next digit
To insert a decimal To accept entered
value
4. Once a tare value has been assigned, the scale will automatically store the value in the selected memory
location and return to the weighing mode with the tare value in use.
Cha
p
ter 18: Storin
g
Tare Values
(
Tare
)
tare tarset
tare 1 mmanual