Operation Instruction

Table Of Contents

Direction for Use

Indicator Light Description

Cautions

1. Connect wireless charger to the power supply.

2. Place the phone in the sensor area to charge it after indicator light is on.

NOTE: the charged device must meet the Qi standard to charge normally.

1. Indicator light is not on in standby mode.

2. Indicator lights up after switching on the power. Indicator lights out after two

seconds.

3. Indicator light is always on while charging normally and multi-color breathing

patterns.

4. When foreign object is detected, the indicator light ﬂashes once every 1 second

until the foreign object is removed.

5. When fully charged, indicator lights out and standby mode is resumed.

1. Do not crush or bump the product.

2. Do not dismounting, disassemble or transform by yourself.

3. Do not put the product close to ﬁre or thrown into water or ﬁre.

4. Do not use wireless charging in severe high temperature, humidity or corrosive

environment to avoid damage or short circuit.

5. Do not put the product together with magnetic items (ID card, bank card, etc.)

for a long time to avoid magnetic failure.

6. Do not place metal items on the wireless charger for a long time.

7. Please keep at least 20cm between the implanted medical device (pacemaker,

cochlear implant, etc.) with the wireless charger to avoid potential interference

with the medical device.

8. Please keep the wireless charger away from water or other liquids.

9. If you need to clean the wireless charger, be sure to disconnect the power.