4&7&/ HB605M :,5(/(66 0212 +($'6(7 86(5 *8,'(
In the Box Overview On/Off/Pairing Adjustable Headband Vol+/Next Track LED Indicator Call Answer/ Play/Pause HB605M Mono Headset V7 Link Bluetooth Dongle Type C charging port Type-C Charging Cable Vol-/Previous Track /Mute Rotate Boom Mic 4&7&/ Internal Mic HB600S :,5(/(66 67(5(2 +($'3+21(6 86(5 *8,'( Boom Mic 3.
How to Wear 1. Insert the detachable Boom Microphone into the 2.5mm receptacle located on the headset. 2. The boom microphone can move to accommodate a user’s preference for right side or left side wear. Mic receptacle 03 3. Position the microphone to your preference.
Operation Power On Slide the switch to the CENTER position Connecting to a PC Power Off PC(w/V7’s Bluetooth Dongle) The V7 USB dongle and headset are pre-paired and ready for use. Plug in the USB dongle and power on the headset to enjoy voice and audio performance range of up to 30 meters (100’) line-of sight. If using the PC’s integrated Bluetooth, your range may be limited to 10 meters (33’) and you may need to select ‘V7 HB605M’ for the audio playback device in the operating system’s settings.
Connecting How to connect with the first Bluetooth device. Connecting to the second Bluetooth device. Bluetooth ON Bluetooth Add bluetooth or other devices Devices V7 HB605M Paired bluetooth off Now discoverable Mouse/Keyboard/Pen V7 link Audio V7 link Slide the power switch to the "CENTER" position. The LED will flash red and blue when ready to connect. Slide the power switch to the “ “ position and hold until ‘pairing’ heard or the pairing LED flashes, then select V7 HB605M.
Calls with a Smartphone Calls with a Smartphone Charging the Headset During charging the red LED will light. When fully charged, the LED will turn off. The headset remains on during charging. To power off, the headset’s power switch must be slid to the off position. Siri/Cortana/Assistance Plug the USB-C charging cable into a computer’s USB port. 10m Press 1 × Answer Press 1 × End Call Press 2 × Decline Press 2 × Plug the USB-C charging cable into a USB wall charger.
Using the charging stand Other Operations Plug the optional charging stand into a powered USB port on your PC, docking station or USB wall charger and then dock the headset. It takes approximately 3 hours to fully charge the headset. Muting the Boom Mic: Depress and hold the button for 2 seconds. Muting the internal Mic: (When boom mic is not in use) Depress and hold the call key 2 seconds.
Product Specifications Battery Status: After the headset is powered on, press the call button briefly to hear the current battery status 100% -75%-50%-25%. Bluetooth version: Bluetooth V5.0 Bluetooth Profile: A2DPv1.3.1; AVRCPv1.6; HFPv1.7; HSPv1.2; SPP v1.2; DID v1.3; HID v1.1; PXP v1.0.1; FMP v1.0; BAS v1.0 Working Frequency: 2.402GHz-2.
WARNING Headsets can deliver sounds at loud volumes and high-pitched tones. Avoid prolonged use of the headset at excessive sound pressure levels. Please read the safety guidelines below prior to using this headset. Safety information Use of a headset will impair your ability to hear other sounds. Use caution while using your headset when you are engaging in any activity that requires your full attention.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
Troubleshooting & Support Headphones will not power on: • Be sure the headphones are fully charged. • Remove “V7 HB605M” from your phone’s Bluetooth device list and try again. • If the model still does not appear, restart the headset and phone, then try again. After successfully pairing, the headphones disconnect • Be sure the battery has adequate power and recharge.
