08082 BLUETOOTH ® HEADSET USERS MANUAL
STOP AND READ BEFORE YOU BEGIN TO USE YOUR JUST WIRELESS® BLUETOOTH® HEADSET, YOU MUST FULLY CHARGE AND PAIR IT WITH YOUR MOBILE PHONE. PLEASE READ THE ENCLOSED USERS MANUAL FOR EASY PAIRING INSTRUCTIONS. SHOULD YOU NEED ASSISTANCE, PLEASE CALL 888-753-6957.
INTRODUCTION Thank you for purchasing the Just Wireless Bluetooth® Headset. We hope you enjoy it. This manual will get you started and help you to get familiar with the features of your headset. For those individuals with the Bluetooth® Headset, in addition to all the other features, the unit supports a multipoint function to allow simultaneous connection of the Bluetooth® Headset with 2 mobile phones.
2 Volume Higher 3 LED Indicator Charging Port 1 6 Earphone Main Button Volume Lower Microphone Adjustable Ear Hook 5 7
FEATURE DIAGRAM 1 LED Indicator Light a) Blue mode indicates active/standby. • 1 Consecutive Flash: Your Bluetooth® Headset is connected to your mobile phone. 2 Volume Higher + 3 Volume Lower - b) Red mode indicates battery level. • Flashing Red - Indicates low battery level. • Solid Red - Indicates your Bluetooth® Headset is being charged. • Light Off - The battery is fully charged.
GETTING STARTED CHARGING YOUR HEADSET Your Just Wireless® Bluetooth® Headset comes with a built in rechargeable battery, and must be fully charged before using. Use the supplied USB Cable to charge your headset by plugging it into the charging jack shown below. The red LED light will flash when you have a low battery level. It is suggested to charge the headset at this time. • The red light will illuminate solid red during charging and will turn off when fully charged.
TURNING THE HEADSET ON AND OFF ON Mode: Press and hold down the Main Button for 3 seconds. Your headset voice prompt will say “Power On” and the blue LED light will flash 1 time. Now your headset is on. Red / blue flashing means your Bluetooth is now in pairing mode. OFF Mode: Press and hold down the Main Button for 3 seconds. You headset will sound a tone and the solid red LED light will turn on. Now your headset is off.
PAIRING AND CONNECTING YOUR HEADSET TO YOUR MOBILE PHONE Pairing is a process of linking the Bluetooth® Headset with your mobile phone. Before using your Bluetooth® Headset, you must successfully pair it to your mobile phone. Your mobile phone must be Bluetooth® compatible. If it is not, you will not be able to pair the headset to your mobile phone. Check the users manual of your mobile phone to see if it is Bluetooth® compatible.
Step 3 - Completing the pairing: Your mobile phone will search for your Bluetooth® Headset. The LED indicator light must continue to consecutively flash blue and red while your mobile phone is searching for your Bluetooth® Headset. If it isn’t flashing blue/red repeat step 1 above. When your mobile phone finds Bluetooth® Headset, you will need to accept your Bluetooth® Headset by pressing “Pair”, “Yes” or “OK” on your mobile phone and then confirm using the passkey or PIN number 0000.
Step 4 - Connecting: Most phones require an additional step to “connect” to a Bluetooth® Headset. Follow the instructions in your mobile phone users manual. Once connected, your Bluetooth® Headset blue LED light will flash. If either the Bluetooth® Headset unit or your mobile phone is turned off, most mobile phones will allow you to automatically connect back to your Bluetooth® Headset once your headset or mobile phone is turned back on. However with some mobile phones, you will need to manually reconnect.
Step 5 - Pairing and Connecting to a Second Phone: For those individuals with the Bluetooth® Headset, it supports a multipoint function to allow simultaneous connection of the headset with 2 mobile phones. Once you have paired and connected your Bluetooth® Headset to the 1st mobile phone, as per the instructions above in steps 1-4, then close Bluetooth® on 1st mobile phone, open Bluetooth® on 2nd mobile phone and repeat instructions in steps 1-4. After paired, reopen 1st mobile phone.
HOW TO USE THE FEATURES ANSWERING CALLS • Tap the Main Button of your headset to answer an incoming call. MAKING CALLS • When you make a call from your mobile phone, the call will automatically transfer to your headset. ADJUSTING VOLUME • Pressing the Volume Higher (+) button increases the speaker volume of the headset. • Pressing the Volume Lower ( ) button decreases the speaker volume of the headset.
MUSIC CONTROLS • Click main button to play / pause • Click volume up / down to adjust volume levels • Press and hold volume down to go back to previous track Press and hold volume up to go to next track
CALL WAITING • Your headset will indicate that there is an incoming call by beeping. To reject the incoming call, press and hold main button for 1 second.
REJECTING A CALL • Press and hold down the main button of your Bluetooth® headset for approximately 1 second and then release the main button. Depending on your mobile phone settings, the call will either go to voice mail or the person calling will hear a busy signal. ENDING A CALL • Tap the main button to your headset to end an active call. RIGHT OR LEFT EAR FITTING • The Just Wireless® Bluetooth® Headset is ready to wear on your right ear.
TROUBLESHOOTING Just Wireless BT”
IF YOU NEED ADDITIONAL HELP Call us toll free at 888-753-6957 and ask to speak to our technical assistance department. Be sure to have the users manual for your mobile phone before calling.
STORING YOUR BLUETOOTH® HEADSET • Always store your Just Wireless® Bluetooth® Headset with the power OFF and make sure it is safely protected. • Avoid storage at high temperatures (above 40°C/104°F) such as in a hot vehicle or in direct sunlight. (Storage at high temperatures can reduce performance and battery life) • Keep the headset or any of its supplied parts from getting wet.
LIFETIME WARRANTY Just Wireless will repair or replace this product if, due to defective parts or workmanship, it does not perform as specified. This warranty covers only repair or replacement of the product itself. This warranty is extended to the original consumer purchaser only. Specifically exempt from this warranty are limited-life consumable components subject to normal wear and tear, such as microphone windscreens, ear cushions, ear tips, decorative finishes, batteries, and other accessories.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
