User's Manual

Setting up the device
Setting up the device
Installing Batteries
The device uses two AAA batteries. Fujitsu recommends high quality alkaline batteries for best
performance and longevity of battery life. If you use rechargeable nickel metal hydride (NiMH)
batteries, be sure to follow the manufacturer’s guidelines for safety and proper usage.
► Remove the battery cover and put in two AAA alkaline batteries. Be sure to insert the negative
(-) end first when inserting new batteries, and remove the plus (+) end first when replacing the
batteries.
► Replace the battery cover, ensure that it slides closed with a “click”.
Synchronizing the Mini-receiver with the computer
i
► The pairing between the Fujitsu Presenter and mini-receiver is completed by factory.
In the event that the Presenter does not sync with the receiver, refer to the following
instructions:
► Make sure the computer power is on.
► Insert the mini-receiver in a USB port and
press the Connect button once.
At this time, the receiver LED will flash slowly.
► Make sure the Fujitsu Presenter is in either
Game mode or Presenter mode.
► Press the Connect button on the presenter
once.
The blue LED on the receiver will then flash
quickly and the synchronizing is completed now.
After a successful connection, the receiver LED
will stay on all the time.
If you do not have a successful connection,
repeat above steps.
6 Fujitsu Technology Solutions