User's Manual

Welcome

Congratulations on your purchase of the Remote Control and Receiver for

Media Center PC with (a) Windows Vista™ and Windows® 7 Home

Premium, (b) Windows® 7 professional, (c) Windows Vista™ and Windows®

7 Ultimate. The infrared (IR) remote control and receiver – also known as a

remote sensor – let you access and manage your Media Center PC and

other peripheral devices.

※Important: if your Media Center PC has receiver installed, skip the

sections in this manual that describe working with the receiver

STEP 1 Insert the Batteries

The remote control uses two AAA batteries, which are included in the

package. Whenever you insert batteries, always make sure both of them are

new.

To insert the batteries

1.1 Remove the battery compartment cover

by pushing on its release and lifting up.

1.2 Insert the batteries, making sure to

properly orient the positive (+) and

negative (－) ends as specified by the

battery compartment labels.

1.3 Replace the battery compartment cover.

STEP 2 Position the Receiver

For optimum performance, make sure that

the distance between the remote control and

the receiver doesn’t exceed 10 meters. Keep

a direct, unobstructed line of sight between

the receiver and the remote control, and don’t

let any natural or artificial light shine directly

on the receiver’s IR sensor. If you already

have an IR receiver, and did not purchase the

receiver, see “Using the Remote Control”

later in this User Manual.