User's Manual

12
To restore the default remote control settings
1. Press and hold the DVD MENU button and then press LEFT navigation
button, and right after you release both buttons you will see the Red
LED turns on for 5 seconds.
2. Press the OK button.
2~3 seconds after, the Green LED on the remote control for Media
Center PC blinks twice to confirm that the buttons have been reset. The
TV Power button will have no command assigned to it, the VOL+, VOL-,
Numeric keypads (0 through 9), CH+, CH-, and Mute buttons will adjust
the Media Center PC system volume and channel.
It the default settings were not restored, the Red LED blinks quickly four
times.
To try again, repeat steps 1 and 2.
To switch the transmitting mode on the remote control
By default, the VOL+, VOL-, Numeric keypads (0 through 9), CH+, CH-, and
Mute buttons on the remote control for Media Center PC control the system
volume and channel on your computer, and the TV button has no command
assigned to it until it “learns” one.
1. Press and hold the DVD MENU button and then press INFO button,
and right after you release both buttons you will see the Green LED
blinks twice for switching to TV MODE and see the Red LED blinks
twice for switching to PC MODE.