User's Manual

9
4. Connect the Line IN device (mp3 player, CD player, or iPod) to the
Music Receive Box and listen it with your speaker system
1) Make sure you run Step 1 to Step 3.
2) Take 3.5mm Phone Plug to 3.5mm Phone Plug Cable (H) and
plug the end of 3.5mm phone plug into the jack on the Music
Receive Box where it shows LINE IN.
3) Plug the other end to your Line IN device.
4) On your Line IN device, press play and enjoy the music!!
*Warning: Music from USB Transmit Dongle is set as priority.
Whenever the Music Receive Box is linking with USB Transmit
Dongle, music from Line IN device will be cutoff automatically.
5. Product Operation
Music Receive Box
Function Instruction LED State
Power On 1) plug in power adapter
2) install the AA batteries
Solid Green (disconnecting with
USB Transmit Dongle or
connecting with Line IN Device)
Link Connected
with USB
Transmit Dongle
Follow Step 1 to Step 3 Blinking Green
Manually Power
Switch
Push and Hold power
button for 2 seconds
Green on when power on
Green off when power off
Manually Music
Output Switch
Push power button to
switch music in-between
Music Receive Box Line
IN Device
Solid Green (connecting with
Line IN Device)
Blinking Green (connecting
with Music Receive Box)
Low Battery
Power Detector
When battery power is
lower than 2.4V
Blinking Red flashes once in
every 2 seconds
USB Transmit Dongle
Function Instruction LED State
Power On Plug dongle to USB port Solid Blue
Link Connected Follow Step 1 to Step 3 Blinking Blue