Wireless Music Station for PC and Mac User Manual (2.
Ϡ Warning Statement…………....... Ϡ Product Ovreview………............. Ϡ How to use the Wireless Music… Ϡ Certification……………………..
Warning Statement FCC Guidelines This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.
Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements – Article 3 Protection requirements for health and safety – Article 3.1a Testing for electric safety according to EN 60950-1 has been conducted. These are considered relevant and sufficient. Protection requirements for electromagnetic compatibility – Article 3.1b Testing for electromagnetic compatibility according to EN 301 489-1, EN 301 489-3 has been conducted. These are considered relevant and sufficient.
Product Overview A Ϥ C Ϥ B Ϥ F Ϥ D Ϥ (A) USB Transmit Dongle (B) Music Receive Box (C) Power Adapter (D) 3.5mm Phone Plug to RCA Cable (E) USB Cable for Charging (F) 3.5mm Phone Plug to 3.
How to use the Wireless Music: 1. Connect the USB Transmit Dongle into a USB Port on your PC or Mac. ቹ1 ቹ 2, GD ༺ԵோՂীሽᆰ 2. Connect the Music Receive Box to your speaker system For home stereo / home theater systems 1) Take Phone Plug to RCA Cable (D) and plug the end of 3.5mm phone plug into the jack on the Music Receive Box where it shows LINE OUT. 2) Plug the other end into an “aux input” or “line-in” jack on your home stereo.
OR For powered multimedia speakers 1) Plug the 3.5mm Phone plug cable from the speakers into the Music Receive Box. 2) Take USB Cable (E) and plug mini USB head into the Music Receiver Box, and plug the other end into Power Adapter (C) ቹ 1, FX ༺Ղଃ ቹ 2, FX ༺Ղሽᄭ 3. Press Play and Listen to Music 1) Please make sure if the USB Speaker setting as the Audio Default Device.
Æ Click and Enter Sounds and Audio Devices Æ Click the Audio column Æ Check whether the USB Speaker sets as the Audio Default Device. If not, please change the default device to USB Speaker.
Æ Click and Enter Sound under Hardware section Æ Check whether the USB Speaker sets as the sound output default device. If not, please change the default device to USB Speaker. 2) On your PC or Mac, open a playlist in your favorite media player and press play.
4. Connect the Line IN device (mp3 player, CD player, or iPod) to the Music Receive Box and listen it with your speaker system 1) Make sure you run Step 1 to Step 3. 2) Take 3.5mm Phone Plug to 3.5mm Phone Plug Cable (H) and plug the end of 3.5mm phone plug into the jack on the Music Receive Box where it shows LINE IN. 3) Plug the other end to your Line IN device. 4) On your Line IN device, press play and enjoy the music!! *Warning: Music from USB Transmit Dongle is set as priority.
with Music Receive Box 6. Troubleshooting Q) The Music Receive Box or USB Transmit Dongle will not turn on. A-1) Make sure the USB Transmit Dongle is completely plugged into the USB port. If you are using the desktop stand, make sure that the stand’s USB cable is completely plugged in as well. A-2) Make sure that the power adapter and USB cable is plugged into the back of the Music Receive Box. A-3) If the Music Receive Box and USB Transmit Dongle still will not turn on, unplug and re-plug it back in.
Q) I press play in my media player, but the music is still coming out of my PC speakers.
