User's Manual

1-2 When the remote near the receiver, press the M-key and
Composite Switch together at least 5 seconds (The M-key
green LED and Receiver‘s red LED will be flash then
already change a new ID).
2. If you had change ID before, remove the battery or the remote
does not work, repeat the steps 1-1 to 1-2.
3. Any key will be not on any more after it is kept working 40
seconds.
4. When the receiver red button is pressed more than 5
seconds, the receiver will not receive any code. Then you
have to do the steps 1-1 to 1-2 to start the remote.