TopSeed Technology Corp. 9F-3, No. 16, Jain Ba Rd., Chung Ho City, Taipei Hsien, Taiwan 235, R.O.C. TEL: +886-2-8226-3811 FAX: +886-2-8226-3822 APPROVAL SH EET No: Date: 2002/08/01 .…………………………………………… Customer: Customer Part No: Parts Name: Part No.: Spec. No.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 2/15 DATE: 2002/08/01 TABLE OF CONTENTS 0.Table of date revision 1.FCC GUIDELINES 2.Description 3.Physical Description and Specification 3-1 Dimensions 3-2 Weight 4.RF Mouse Specification 4-1 Main Feature 4-2 System Requement 4-3 RF Optical Mouse Characteristics 4-4 RF Characteristics 5.Electronical Block Diagram 5-1 FSK (912MHZ) Transmitter 5-2 FSK (912MHZ) Receiver Table of date-revision APPD. CHKD. DSGD. SPEC. NO. MSBG0002-902 SYMB.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 3/15 DATE: 2002/08/01 TABLE OF CONTENTS 6.Electrical Characteristics 6-1 GENERAL SPECIFICATION 6-2 Operational Range 6-3 Electrostatic Discharge (ESD) Sensitivity 6-4 AC/DC Characteristics 7. Mechanical Spec. 8. Endurance Test 8-1 Tracking life Test 8-2 Left and right button life test 8-3 High Temperature Test 8-4 Wheel scroll button life test 8-5 Drop test 8-6 ESD test 8-7 Drop Test 8-8 Scrolling life Test 9.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 4/15 DATE: 2002/08/01 FCC GUIDELINES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 5/15 DATE: 2002/08/01 2. Description: The RF Optical Mouse is a FSK (Frequency Shift Key) Transmitter for the frequency band 902-928 MHz. The RF Optical Mouse offers a full-integrated PLL synthesizer and a high efficiency power amplifier to drive a loop antenna; A special circuit design and an unique power amplifier design are used to save current consumption and to save battery live.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 6/15 DATE:2002/08/01 3. Physical Description and Specification: 3.1 Dimensions The approximate dimensions of the mouse’ s transmitter is as follo ws: Length 104.5 mm Width 55 mm Height 37.5 mm 3.2 Weight The approximate dimensions of the mouse’ s transmitter is as follows: Weight of the RF Mouse not to exceed 65 grams (without batteries). APPD. CHKD. DSGD. SPEC. NO. MSBG0002-902 SYMB. PAGE DATE APPD. SHKD. OSGD.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 7/15 DATE:2002/08/01 4.RF Optical Mouse Specification 4-1 Main Feature The RF Optical Mouse consists of three major parts; a baseband controller-The New HP ADNS-2030 Chipoffers extra high 800 Dpi resolution, a radio that suitable for America available 902–928 MHz frees ISM band applications, and a low power uC-controlled, includes RF antenna supporting circuitry, together with basic RF software level.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 8/15 DATE:2002/08/01 4.RF Optical Mouse Specification 4-3 RF Optical Mouse Characteristics Wireless Freedom Free yourself from desktop clutter and extra cables. The 64 Channel ID common radio frequency reduces interference and allows you to place the receiver out of sight.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 9/15 DATE: 2002/08/01 4.RF Optical Mouse Specification 4-4 RF Characteristics Frequency Range 912 MHz Modulation FSK Channel No. 1 Channel I.D 6 bits 64 Operation Voltage 3V Battery AAA*2 Alkaline batteries. Batter Life 2 months TX Power < 0dBm (1mW) Transmission rate 6K bps TX FM frequency deviation 60-120 KHz Frequency tolerance +/- 20ppm Hardware Resolution 800dpi Button 3 Transmission Distance 5-7 Meter APPD. CHKD. DSGD. SPEC. NO.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 10/15 DATE: 2002/08/01 5. Electrical Block Diagram 5-1 FSK (912MHZ) Transmitter APPD. CHKD. DSGD. SPEC. NO. MSBG0002-902 SYMB. PAGE DATE APPD. SHKD. OSGD.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 11/15 DATE: 2002/08/01 5-2 FSK (912MHZ) Receiver USB 1.1 compliant The module is a USB high-speed class device (12 Mbps) and has the full functionality of a USB slave APPD. CHKD. DSGD. SPEC. NO. MSBG0002-902 SYMB. PAGE DATE APPD. SHKD. OSGD.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 12/15 DATE: 2002/08/01 6. Electrical Characteristics: 6.1 GENERAL SPECIFICATION 6.1.1 Operation temperature range : -10 ~ + 55 6.1.2 Storage temperature range : - 25 ~ + 65 6.1.3 Relative humidity range : 10 %~ 95 % RH 6.2 Operational Range Parameter Min 3.0 Supply Voltage Frequency (US) Max 3.6 912MHz+/-50KHz Ambient temperature -10 Unit V MHZ 60 6.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 13/15 DATE: 2002/08/01 6.4 AC/DC Characteristics Supply Voltage: VS= 3.0 V Parameter Current Consumption Min Typ Max Unit Sleep mode Stand by mode 140 1.6 180 2 uA mA Transmit Mode 25 35 mA Data rate Sensitivity Transmitter settling time Power amplifier output Output power (Transmit mode) -4 6K -102 bps dbm 2.2 ms 0 1 2 dbm mW 7.Mechanical Specification ITEM 7.1 Mouse Operating force 7.2 Button operating force 7.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 14/15 DATE: 2002/08/01 8.Endurance ITEM SPECIFICATION 8.1 (1) Switching frequency 1~2cycles/sec Left and right (2) Switch Actuation force: 50-100 gram force button life test (3) Minimum Actuation per Switch 500,000 actuation 8.2 (1) Switching frequency 1~2cycles/sec Wheel scroll (2) Switch Actuation force: 50-100 gram force button life test (3) Minimum Actuation per Switch 500,000 actuation s 8.3 Drop test 8.3 ESD test 8.
TopSeed Technology Corp. SPECIFICATION FOR RF Optical Mouse PAGE: 15/15 DATE: 2002/08/01 9. Environmental Tests ITEM SPECIFICATION 9.1 Measure initial value at standard testing conditions. Leave samples in 60 2 C for 96 5 hours, and in standard Heat load test testing conditions for 2 hours, then take measurements within 1 hour. Leave samples in 40 5 C for 24 2 hours, and in standard 9.2 Humidity load testing conditions for 2 hours, then take measurements.