SAFETY PRECAUTIONS + It ls hazardous for anyone other than a competent person to cant out any service or repair operation that Involves the removal of a cover ‘which gives protection against exposure to electrical parts + if the supply cord ks damaged, tt must be replace by the manufacturer its service slant or sisterly quaint persons in order to avoid hazer + This product is intent far housemaid uss ably. Da not uss outdoors.
Page Hand Tube button's 1 Mas sari. Pad 2 ool 18. Capee da Cor carpet cng ony) 1 How Assemble Important] Do nat Lisa the steam map If their ls any slavish damage an tha product 1) Fit the handle ton onto tha chance tuba, apply a ‘slam amount of pressure ut! you hear It ‘hick Into clap. J 2) Inca this la recurs, put the assembly into tha top of the main unit with the chord hook paras! to the ack of the unit Push the tab on the bass totality tha handle to duly insert and secure. This ghouls ‘elk Ita place.
2 How to lies Attach mop pul To attach the pad, pace t on the flair with theocratic fatback upwards Lift tho map abase the pad and align the heal with the mop pad. Lover the pad and rest the mop an It ta secure tha cravat to the head. Put the Carpet Balder on for carpet cleaning purpose. To remove the pa, secure your foot on the protruding part of hider and lft the mop away. Note: + The steam mop should never be operated without the mop pad attached.
-Streetwise After all required parts are assailed, make sure your floors are vacuumed/swopt harbors using the steam mop 1)Flll the water tank. 2) Po war on the mop. 3) Tum the Power Dial clockwise to choose steam level [3 steam levels). Page? 4) Walt about 20 seconds for heating ‘and ready to usa as the mop steams. 5) Tit the steam mop backwards, approximately 45°, and get started.
Notes: + When using tha steam mop, da not leave It over a particular area for mare than 30 seconds. This could cause damage. If tha steam flow slows dawn or stops the unit may nad refiling with water. 3 How te Store 1) Tum the power dial to the ‘off position and allow the unt to col. 2) Switch tha power aff at the plug socket and ram ova the plug 3) Allow the mop pad to fully cool and then carefully remove from the mop head. 4] Empty any remaining water from the water tank before storing.
incinerator it I not downrange + The unit may not be plugged in property/the fuse or breaker may nat be working, Very tha units plugged securely Into an approved. electrical outlet and that the fuse or breaker is functioning property. Ensues the power cla is switched to ‘ON. There ls a peculiar sme coming from the unit catharsis Isa ocular sme coring fore the ust Fiat time using product. IF tha is the first time you are using the mop, the smell may ba due to ew parts being heated up for the first time.
