User Manual

Table Of Contents

DSP software connection / IP Control instruction

1. List of required materials

Computer（window system7-10）*1

Router*1

Network cable *1

CS PRO_1.09 software*1

EVENT 2K / EVENT 4K SYSTEM *1PCS

2. Connect the router to the module network port and turn on the power.

3. Make the computer connect to the router and open software “CS PRO_V1.0.9”

5. Click the “Refresh”，and Click the “Device List” that appears. After the connection is OK, you

can make initial debugging on this user page.

Click

EVENT 2K