User Manual

8
Connection Plate System
Make your initial connections with all the equipment powered off, and ensure that all the
main volume controls are turned completely down.
1) Connect one side of the signal cable at your audio mixer into output left / right (with
Stereo-Jack or XLR) and the other side of the cable into the line input (Stereo-Jack) of your active
speaker cabinet.
2) Connect the power cord to mains.
3) Turn on your mixer first, then the active speaker cabinets.
4) Turn up the volume control of the active speaker cabinets.
5) Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level
control to manipulate the output level.
6) After using, turn off your stereo power amplifier first, then the mixer.
Signal Cable
Mixer
Signal Cable
Left
Main Mix
Output
Right
Main Mix
Output
14