User Manual

7
DSP Control
The Name menu is the name of the current speaker. This menu allows you to customize the name of the
speaker as needed.
The Default Settings menu is used to reset the speakers to their original factory settings. The options for this
selection are: NO or YES.
The Exit menu is used to return to the main interface.
To reset your system to original factory settings, follow below steps:
1. From the System menu in the DSP menu, select Default Settings.
A message prompt to restore the factory settings will appear - Reset ALL Setting - YES.
2. Reset ALL Setting select YES
3. Are you sure choose YES
The speaker will reboot the system and reset the system to its original factory settings.
System
Reset All
Settings ?
YesNo
System
Are you sure ?
YesNo
System
SETTING...
System
FIRMWARE V1.0
HARDWARE V1.0
Name: EVENT 2K
Default Settings Exit
12