User Manual

CONNECTION PLATE SYSTEM
5
8
SOHO V4
Pole
SOHO S10 SOHO S10
Signal Cable
Mixer
Signal Cable
Speaker Cable
Speaker Cable
Left
Main Mix
Output
Right
Main Mix
Output
SOHO V4
Pole
Make your initial connections with all the equipment powered off, and ensure that all the
main volume controls are turned completely down.
1) Connect one side of the signal cable at your audio mixer into output left / right (with
Stereo-Jack or XLR) and the other side of the cable into the line input (Stereo-Jack) of your
active speaker cabinet.
2) Connect the power cord to mains.
3) Turn on your mixer first, then the active speaker cabinets.
4) Turn up the volume control of the active speaker cabinets.
5) Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level
control to manipulate the output level.
6) After using, turn off your stereo power amplifier first, then the mixer.
SOHO S15+V8 SYSTEM
6