Installation Manual
Table Of Contents
- 2.2.1If it is for the first installation, go to "New de
- then tap "Power is on, next step". Here you can ch
- "Connected network Cable" or "Not connected the ne
- -Connected network Cable:
- --Not Connected to the network Cable:
- 2.2.2If the camera has been added successfully before a
- a.You can fill the UID manually, or scan the QR code
- b.Also you can tap "Search nearby devices", the came
- c.Pay attention to the login username and password o
- d.Tap "Confirm add", name your camera and go to the
Topodome Quick Installation Guide QIG-En-V1.0
23
www.topodome.com Tech support email support@topodome.com
multiple video files will be generated.
Q8: I always receive mobile alarm notifications, but no
one is found in the video?
A8: If the camera's motion alarm sensitivity is set too high,
any passing objects will trigger an alarm, such as animals
walking by, shaking of plants, sudden changes in light, etc.
Please set the appropriate sensitivity and set an alarm area
(such as in front of the door), so that motion detection can
work more effectively. In addition, when the weather
changes and there is rain or snow, the camera's motion
detection function will be disturbed.
Q9: What kind of memory card does the camera
support?
A9: The memory card supported by the Topodome camera
is a Micro SD card, its size is 15mm × 11mm × 1mm;
please be careful not to buy an standard SD card for the
camera, it is larger (24mm×32mm×2.1mm).
Q10: Where can I find the slot to install a memory
card?
A10: For S series cameras, most of the card slots are
located at the top of the dome case. Please open the card
slot protection cover and install the memory card; however,
M series cameras and some S series cameras have