Installation Manual
Table Of Contents
- 2.2.1If it is for the first installation, go to "New de
- then tap "Power is on, next step". Here you can ch
- "Connected network Cable" or "Not connected the ne
- -Connected network Cable:
- --Not Connected to the network Cable:
- 2.2.2If the camera has been added successfully before a
- a.You can fill the UID manually, or scan the QR code
- b.Also you can tap "Search nearby devices", the came
- c.Pay attention to the login username and password o
- d.Tap "Confirm add", name your camera and go to the
Topodome Quick Installation Guide QIG-En-V1.0
16
www.topodome.com Tech support email support@topodome.com
3.2 Install the camera with CMS Software
1. Please download the CMS software from the URL of
www.topodome.com/support, the software named
HiP2P Client.
2. After the CMS software is installed, a
shortcut will appear on the desktop.
Double click and run the software.
3. Click the green "+" button at the top of the main screen,
a login window will pop up, please keep the password
area empty (there is No default password), and then