Installation Manual
Table Of Contents
- 2.2.1If it is for the first installation, go to "New de
- then tap "Power is on, next step". Here you can ch
- "Connected network Cable" or "Not connected the ne
- -Connected network Cable:
- --Not Connected to the network Cable:
- 2.2.2If the camera has been added successfully before a
- a.You can fill the UID manually, or scan the QR code
- b.Also you can tap "Search nearby devices", the came
- c.Pay attention to the login username and password o
- d.Tap "Confirm add", name your camera and go to the
Topodome Quick Installation Guide QIG-En-V1.0
14
www.topodome.com Tech support email support@topodome.com
2.4 Modify Wireless Configuration via App
You can modify the WIFI configuration via APP anytime. Go
to "functions settings", tap "Wireless setting".
a. You can get the Wi-Fi list near your device, if you want
to change a new Wi-Fi network, just choose the new
SSID and input the login password to connect again.
b. If you have modified the login password of the old
WiFi network, then the camera will offline. Please
connect the camera to the router with a network cable,
when the camera logs in again, modify the login
password of WiFi in wireless settings.
c. If you will not connect the camera with a network cable,
then you have to reset the camera and install it again.
Fig2.6 Modify Wireless Settings