User Manual
Table Of Contents
- Thank you for your purchase!
- Important Warnings
- 1.Features
- 2.Camera Setup Guide
- 3.Setup Camera with Mobile Phones
- 3.1.Download and Install CamHiPro App on your mobile p
- 3.2.Set up a new camera
- 3.3.Install a camera in use
- 3.4.How to use the features of CamHiPro App
- 3.4.1. Main interface of APP
- 3.4.2.Live window of the APP
- 3.4.2.1.Basic layout of the portrait video window 1
- 3.4.2.2.Basic layout of the portrait video window 2
- 3.4.2.3.Basic layout of the portrait video window 3
- 3.4.2.4.Basic layout of the Landscape video window
- 3.4.2.5.Features of the Toolbar
- 3.4.3. Functions of control buttons
- 3.4.4. Settings of the Camera
- 3.4.5. Video Files on Local Phone and SD Card
- 3.4.5.1. Video Files on SD Card
- 3.4.5.2.Video Files on Local Phone
- 4.Setup Camera with CMS Software
- 5.Install Cameras with Web Browser on Computer
- 6.Access Camera via NVR/ RTSP/ Blue Iris
- 7.Web Interface for Operation
Topodome Security Camera TD-Sx series
User Manual V1.1
Email: support@topodome.com
Website: www.topodome.com
9
3.2.1. Run the APP of "CamHipro"
After the camera is powered on, please run the app "CamHipro" to enter the installation interface.
Tap the "add device" button, then choose "IP camera" option.
If this is the first installation of your camera, please select: "New device"; if you have already
completed an installation before, please select "Device in use"", and refer to Chapter 3.3.
Now, please click "new device" and continue click "Power is on, next step".
Choose "IP camera"