User Manual

Topodome Security Camera TD-Sx series
User Manual V1.1
Email: [e-mail]
Website: www.topodome.com
8
3. Setup Camera with Mobile Phones
3.1. Download and Install CamHiPro App on your mobile phone
To access your camera on a mobile device, please search and download the "CamHiPro" App
from Apple Store or Google Play, and then install it.
IOS Version Android Version
Note:
1. The software interface on this manual may be slightly different from the actual downloaded
software, which is caused by the version.
2. Currently the camera supports 2.4GHz band only. So if you have a dual band router, please
only connect to 2.4G band.
3. The username and password are case sensitive.
3.2. Set up a new camera
Before installing your new camera, please confirm that you have connected the power
adapter and installed the antenna according to the above instructions.
If you are not familiar with hotspot installation, we strongly recommend that you use a
network cable (prepared in the box) to connect the camera to the router and complete the
first installation. Then you can configure the wireless connection and finally realize the
wireless connection of the camera to the internet.
If you don't want to connect the network cable, you can follow the hotspot installation method
to complete the software installation of the camera, but it should be noted that the camera
must be close to the router during installation to prevent poor signal from causing installation
failure.