User Manual
Table Of Contents
- Thank you for your purchase!
- Important Warnings
- 1.Features
- 2.Camera Setup Guide
- 3.Setup Camera with Mobile Phones
- 3.1.Download and Install CamHiPro App on your mobile p
- 3.2.Set up a new camera
- 3.3.Install a camera in use
- 3.4.How to use the features of CamHiPro App
- 3.4.1. Main interface of APP
- 3.4.2.Live window of the APP
- 3.4.2.1.Basic layout of the portrait video window 1
- 3.4.2.2.Basic layout of the portrait video window 2
- 3.4.2.3.Basic layout of the portrait video window 3
- 3.4.2.4.Basic layout of the Landscape video window
- 3.4.2.5.Features of the Toolbar
- 3.4.3. Functions of control buttons
- 3.4.4. Settings of the Camera
- 3.4.5. Video Files on Local Phone and SD Card
- 3.4.5.1. Video Files on SD Card
- 3.4.5.2.Video Files on Local Phone
- 4.Setup Camera with CMS Software
- 5.Install Cameras with Web Browser on Computer
- 6.Access Camera via NVR/ RTSP/ Blue Iris
- 7.Web Interface for Operation
Email: support@topodome.com
Website: www.topodome.com
59
Topodome Security Camera TD-Sx
series
User Manual V1.0
file in order to load and playback smoothly. The timed recordings are titled as "Plan recording" on
SD Playback list of App; and "P" on the list of Playback on computer.
4) Email
On this page you can configure the parameters for sending alarm by email.
Note:
SMTP port is usually set as 25. Some SMTP servers have special port, such as 587 or 465.
Authentication is used for transport layer security, it is usually none. If you use gmail and enable
the authentication with TLS or STARTTLS, the SMTP port must be set to 465 or 587, it depends
the authentication type you selected.
You can click the "Test" button to check whether your email settings are valid or not.
5) FTP
Setting FTP server to save recordings on computer is available. You can click the "Test" button to
check whether your settings are correct and can be passed.