User Manual
Table Of Contents
- Thank you for your purchase!
- Important Warnings
- 1.Features
- 2.Camera Setup Guide
- 3.Setup Camera with Mobile Phones
- 3.1.Download and Install CamHiPro App on your mobile p
- 3.2.Set up a new camera
- 3.3.Install a camera in use
- 3.4.How to use the features of CamHiPro App
- 3.4.1. Main interface of APP
- 3.4.2.Live window of the APP
- 3.4.2.1.Basic layout of the portrait video window 1
- 3.4.2.2.Basic layout of the portrait video window 2
- 3.4.2.3.Basic layout of the portrait video window 3
- 3.4.2.4.Basic layout of the Landscape video window
- 3.4.2.5.Features of the Toolbar
- 3.4.3. Functions of control buttons
- 3.4.4. Settings of the Camera
- 3.4.5. Video Files on Local Phone and SD Card
- 3.4.5.1. Video Files on SD Card
- 3.4.5.2.Video Files on Local Phone
- 4.Setup Camera with CMS Software
- 5.Install Cameras with Web Browser on Computer
- 6.Access Camera via NVR/ RTSP/ Blue Iris
- 7.Web Interface for Operation
Email: support@topodome.com
Website: www.topodome.com
49
Topodome Security Camera TD-Sx
series
User Manual V1.0
5.8. Control Panel for Edge/ Firefox/ Chrome/ Safari
Compared with the control panel of IE11, the control panels of other browsers lack functions
such as multi-screen, video playback, and screenshots.
If it is only used for basic purposes, there will be no problem.
5.9. Remote Web Access
When the camera you want to access remotely is on WLAN (refer to chapter 3.3), it will be more
difficult to access with a browser, you have to use UPnP/DDNS functionality or Port Forwarding.
Before using UPnP/DDNS functionality, ensure your router should support the uPnP networking
protocol and the protocol should be enabled. Please refer to your router manufacturer’s
documentation to learn how to enable UPnP.
Login the camera via web browser, go to the "Settings" ->"Network"->"DDNS" page to enable
the UPnP and enter the information of a third-party’s DDNS, such as "Dyndns.org", "3322.org",
"dynddns.us", or "No-ip.com". Click Apply to save the settings. Then you can access the
camera by DDNS remotely.
Port Forwarding is another method to set up remote access. It is required to make settings on
both the camera and your router. Please refer to the corresponding documentation provided by
the manufacturer or from the FAQ area of the support center on our website
www.Topodome.com to learn the detail instructions.