User Manual
Table Of Contents
- Thank you for your purchase!
- Important Warnings
- 1.Features
- 2.Camera Setup Guide
- 3.Setup Camera with Mobile Phones
- 3.1.Download and Install CamHiPro App on your mobile p
- 3.2.Set up a new camera
- 3.3.Install a camera in use
- 3.4.How to use the features of CamHiPro App
- 3.4.1. Main interface of APP
- 3.4.2.Live window of the APP
- 3.4.2.1.Basic layout of the portrait video window 1
- 3.4.2.2.Basic layout of the portrait video window 2
- 3.4.2.3.Basic layout of the portrait video window 3
- 3.4.2.4.Basic layout of the Landscape video window
- 3.4.2.5.Features of the Toolbar
- 3.4.3. Functions of control buttons
- 3.4.4. Settings of the Camera
- 3.4.5. Video Files on Local Phone and SD Card
- 3.4.5.1. Video Files on SD Card
- 3.4.5.2.Video Files on Local Phone
- 4.Setup Camera with CMS Software
- 5.Install Cameras with Web Browser on Computer
- 6.Access Camera via NVR/ RTSP/ Blue Iris
- 7.Web Interface for Operation
Email: support@topodome.com
Website: www.topodome.com
45
Topodome Security Camera TD-Sx
series
User Manual V1.0
The IP Address and HTTP port number of the camera are displayed on the list of the Search Tool.
Usually the default HTTP port No. is 80.
Now the login windows will pop out as below.
If it is the first time to install the camera on the IE browser, please click "setup software".
Please note that before installing this plugin software, be sure to close the anti-virus software on
your computer, because the anti-virus software will mistake this plugin as harmful software and
prevent its installation.
After the installation is over, please refresh your browser and click "PC view", then the login
window of the camera will pop up. Input correct user and password(default admin and admin).
After the login is completed, a prompt will pop up at the bottom of the web page, asking for
permission to run the network plug-in. Please click “Allow”.