User Manual
Table Of Contents
- Thank you for your purchase!
- Important Warnings
- 1.Features
- 2.Camera Setup Guide
- 3.Setup Camera with Mobile Phones
- 3.1.Download and Install CamHiPro App on your mobile p
- 3.2.Set up a new camera
- 3.3.Install a camera in use
- 3.4.How to use the features of CamHiPro App
- 3.4.1. Main interface of APP
- 3.4.2.Live window of the APP
- 3.4.2.1.Basic layout of the portrait video window 1
- 3.4.2.2.Basic layout of the portrait video window 2
- 3.4.2.3.Basic layout of the portrait video window 3
- 3.4.2.4.Basic layout of the Landscape video window
- 3.4.2.5.Features of the Toolbar
- 3.4.3. Functions of control buttons
- 3.4.4. Settings of the Camera
- 3.4.5. Video Files on Local Phone and SD Card
- 3.4.5.1. Video Files on SD Card
- 3.4.5.2.Video Files on Local Phone
- 4.Setup Camera with CMS Software
- 5.Install Cameras with Web Browser on Computer
- 6.Access Camera via NVR/ RTSP/ Blue Iris
- 7.Web Interface for Operation
Topodome Security Camera TD-Sx series
User Manual V1.1
Email: support@topodome.com
Website: www.topodome.com
27
4) Sent photos to email or FTP Server
When an alarm occurs, if the user has configured the mail server and FTP server, the camera will
send alarm screenshots to the mail and FTP server. The specific mail configuration and FTP server
configuration will be a bit complicated, please refer to the relevant documents on
www.topodome.com. The number of photos sent is from 1 to 3, users can choose by themselves.
3.4.4.3. Video Setting
The default bit rate of first stream and second stream can not be changed with App, if you want to
fix the bit rate (Please make sure you know the impact of doing this), please refer the chapter 4.1.1.
Note:If your power format is 50hz (Europe or some Asian and African countries, please select the
video format as 50 Hz; conversely, when the power format is 60hz (USA or Japan), select 60 Hz.