User Manual
Table Of Contents
- Thank you for your purchase!
- Important Warnings
- 1.Features
- 2.Camera Setup Guide
- 3.Setup Camera with Mobile Phones
- 3.1.Download and Install CamHiPro App on your mobile p
- 3.2.Set up a new camera
- 3.3.Install a camera in use
- 3.4.How to use the features of CamHiPro App
- 3.4.1. Main interface of APP
- 3.4.2.Live window of the APP
- 3.4.2.1.Basic layout of the portrait video window 1
- 3.4.2.2.Basic layout of the portrait video window 2
- 3.4.2.3.Basic layout of the portrait video window 3
- 3.4.2.4.Basic layout of the Landscape video window
- 3.4.2.5.Features of the Toolbar
- 3.4.3. Functions of control buttons
- 3.4.4. Settings of the Camera
- 3.4.5. Video Files on Local Phone and SD Card
- 3.4.5.1. Video Files on SD Card
- 3.4.5.2.Video Files on Local Phone
- 4.Setup Camera with CMS Software
- 5.Install Cameras with Web Browser on Computer
- 6.Access Camera via NVR/ RTSP/ Blue Iris
- 7.Web Interface for Operation
Topodome Security Camera TD-Sx series
User Manual V1.1
Email: support@topodome.com
Website: www.topodome.com
26
d. Alarm trigger
This option has two options: Alone trigger and Linkage trigger. If the linkage trigger is selected,
the motion detection and humanoid alarm must work at the same time.
e. Alarm Planning
This option has two options: Easy setup and Advantage trigger. When easy setup is selected, the
device will be triggered in any time; when advantage trigger is selected, user can make a plan for
the trigger time.
3) Alarm Linkage
This option is used for the function that the camera can operate at the same time when the alarm is
triggered. For example, saving the video files to to SD card.
Please note, alarm video will be only 15 seconds for one file.