User Manual
Table Of Contents
- Thank you for your purchase!
- Important Warnings
- 1.Features
- 2.Camera Setup Guide
- 3.Setup Camera with Mobile Phones
- 3.1.Download and Install CamHiPro App on your mobile p
- 3.2.Set up a new camera
- 3.3.Install a camera in use
- 3.4.How to use the features of CamHiPro App
- 3.4.1. Main interface of APP
- 3.4.2.Live window of the APP
- 3.4.2.1.Basic layout of the portrait video window 1
- 3.4.2.2.Basic layout of the portrait video window 2
- 3.4.2.3.Basic layout of the portrait video window 3
- 3.4.2.4.Basic layout of the Landscape video window
- 3.4.2.5.Features of the Toolbar
- 3.4.3. Functions of control buttons
- 3.4.4. Settings of the Camera
- 3.4.5. Video Files on Local Phone and SD Card
- 3.4.5.1. Video Files on SD Card
- 3.4.5.2.Video Files on Local Phone
- 4.Setup Camera with CMS Software
- 5.Install Cameras with Web Browser on Computer
- 6.Access Camera via NVR/ RTSP/ Blue Iris
- 7.Web Interface for Operation
Topodome Security Camera TD-Sx series
User Manual V1.1
Email: support@topodome.com
Website: www.topodome.com
24
3.4.4.2. Alarm Settings - Alarm management and notification
1) Alarm Push
This option can activate the phone's alarm receiving function. When an alarm is triggered, a
message will be pushed to the phone.
Also, user can name the push message with new name as your will.
2) Equipment Alarm
This option includes motion detection alarm, audible alarm, humanoid alarm, and alarm linkage
settings.
a. Motion detection alarm:
When this option is enabled, objects moving in front of the camera will trigger an alarm, and the
user can set the sensitivity and trigger area to trigger the alarm. It should be noted that motion
detection alarms are often falsely triggered, such as fallen leaves and rain, so it is best to set a
specific trigger area and adjust the sensitivity.