User Manual

Topodome Security Camera TD-Sx series
User Manual V1.1
Email: [e-mail]
Website: www.topodome.com
22
will be positive feedback.
Press the up arrow, the camera head will turn up
Press the down arrow, the camera head will turn down
Press the left arrow, the camera head will turn left
Press the right arrow, the camera head will turn right
Press the "+" button, the camera lens will zoom in, and view angle will become
narrow.
Press the "-" button, the camera lens will zoom out, and view angle will become
wide.
Click the Mirror/Flip button, two options will appear, and the user can realize the
function of mirroring the graphics and flipping up and down.
Click the focus button, the user can precisely adjust the focus, and achieve the
best focus effect through foucs+ and foucs-.
By pressing the preset button, the user can set multiple preset positions. Swipe
with your finger to control the PTZ to rotate to a suitable position, then enter a
number between 1-32, press "Setting" to store the position; when the camera
moves to another position, enter the same number, click on the "Transfer ", the
camera will turn Go back to the position just defined.
For more functions about Preset, please refer to the chapter of PRESET.
Click the volume button, the user can adjust the input and output volume of the
camera.
Click the image adjustment button, the user can adjust the brightness, contrast
and sharpness of the image.
Click the intelligent tracking button to turn on the smart tracking function of the
camera, camera will auto rotate and track any object likes human; click again to
turn off the function.
HD/ SD
On the image of video, click the SD/HD label and switch to high definition (HD) or
smooth definition(SD).
3.4.4. Settings of the Camera
Click the gear button from main video interface or cameras list, you can go to set the basic
settings, alarm settings, audio and video management, SD card recording and system settings.
3.4.4.1. Basic Settings
1) Wireless setting
Under this option, the user can view the wireless network that the current camera is connected to,
or set a new wireless network and connect, but it should be noted that these networks must be
2.4G networks, and the password of WiFi can not include special chars such as: &, #,@，/....