User Manual

Topodome Security Camera TD-Sx series
User Manual V1.1
Email: [e-mail]
Website: www.topodome.com
14
In some cases, the hotspot will not be displayed in the list immediately. Or clicking "Go to
connect" for auto connecting failed. At this time, you can manually connect to the hotspot to
complete this step (the way is the same as the Apple mobile phone).
As above photos, please manually switch to WLAN of the Android phone, find the new camera
Hotspots name: IPCAM-xxxxxx (xxxxxx is same as the label of camera), fill the password
"01234567", then click "Connect", Android phone will connect to the camera’s hotspots.
Switch back to the CamHiPro App, you can find the device login page, and keep the default
user and password as “admin”, tap “Add To”, App will jump to wireless setup page, the following
steps please refer to the Chapter 3.2.2.
Note: ①You will not find any hot spots if the camera has connected the router with the Ethernet
cable. ②If the hotspot keeps not appearing, please press the reset button of the camera for more
than 5 seconds to clear the original configuration and restart the operation from the first step.
Choose the
name of
Hotspots:
IPCAM-
xxxxxx
in the
WLAN
Default
password is
"01234567"