User Manual
Table Of Contents
- Thank you for your purchase!
- Important Warnings
- 1.Features
- 2.Camera Setup Guide
- 3.Setup Camera with Mobile Phones
- 3.1.Download and Install CamHiPro App on your mobile p
- 3.2.Set up a new camera
- 3.3.Install a camera in use
- 3.4.How to use the features of CamHiPro App
- 3.4.1. Main interface of APP
- 3.4.2.Live window of the APP
- 3.4.2.1.Basic layout of the portrait video window 1
- 3.4.2.2.Basic layout of the portrait video window 2
- 3.4.2.3.Basic layout of the portrait video window 3
- 3.4.2.4.Basic layout of the Landscape video window
- 3.4.2.5.Features of the Toolbar
- 3.4.3. Functions of control buttons
- 3.4.4. Settings of the Camera
- 3.4.5. Video Files on Local Phone and SD Card
- 3.4.5.1. Video Files on SD Card
- 3.4.5.2.Video Files on Local Phone
- 4.Setup Camera with CMS Software
- 5.Install Cameras with Web Browser on Computer
- 6.Access Camera via NVR/ RTSP/ Blue Iris
- 7.Web Interface for Operation
Topodome Security Camera TD-Sx series
User Manual V1.1
Email: support@topodome.com
Website: www.topodome.com
10
3.2.2. Installing new camera with cable connected
Please select "Connected network cable", and the APP will automatically search for connected
cameras and display them in the list. Please note that if you have installed multiple Topodome
cameras in same LAN, more than one camera UID number will appear in the list. Please check
the label on the new camera and select the camera to be installed according to the UID number
on the label, it should be "SSXX-number-letter.
Tap the UID number of the new camera to enter the device login window, where you need to
enter the correct user name and password. The default user name and password are "admin"
and "admin". If the default password is incorrect, it may be that the user name or password of the
camera has been modified (Please reset the camera refer to the Chapter 2.4).
If the login password is OK, then tap "Add to" and you will go to wireless configuration page.
Label on camera
WiFi Select