Installation Manual
Table Of Contents
- 2.2.1If it is for the first installation, go to "New de
- then tap "Power is on, next step". Here you can ch
- "Connected network Cable" or "Not connected the ne
- -Connected network Cable:
- --Not Connected to the network Cable:
- 2.2.2If the camera has been added successfully before a
- a.You can fill the UID manually, or scan the QR code
- b.Also you can tap "Search nearby devices", the came
- c.Pay attention to the login username and password o
- d.Tap "Confirm add", name your camera and go to the
Topodome Quick Installation Guide QIG-En-V1.0
5
www.topodome.com Tech support email support@topodome.com
1.4 During the camera configuration process, if you use a
mobile phone or tablet device, you can choose to
connect the camera to the router with a network cable,
or choose not to connect the network cable. Instead,
connect the camera's hotspot first, and then set up a
wireless connection with the router.
1.5 If you are using a PC for configuration, you must
connect the camera to the router with a network cable
(you can find the network cable in the gift box).
Fig1.2 Connect the camera to router with Ethernet cable
LAN Port