Installation Manual
Table Of Contents
- 2.2.1If it is for the first installation, go to "New de
- then tap "Power is on, next step". Here you can ch
- "Connected network Cable" or "Not connected the ne
- -Connected network Cable:
- --Not Connected to the network Cable:
- 2.2.2If the camera has been added successfully before a
- a.You can fill the UID manually, or scan the QR code
- b.Also you can tap "Search nearby devices", the came
- c.Pay attention to the login username and password o
- d.Tap "Confirm add", name your camera and go to the
Topodome Quick Installation Guide QIG-En-V1.0
4
www.topodome.com Tech support email support@topodome.com
Start Installation of the Camera
These cameras can be installed by a smartphone/ tablet
(Android or iOS), or by a PC (Windows or Mac OS). Please
finish the hardware installation first and begin the software
configuration refer to the below guide.
1. Hardware installation
1.1 Mount the Wi-Fi antenna and make it stand vertically.
1.2 Connect the camera’s DC socket with the power
adapter, the camera will turn on automatically.
1.3 Before configuring the camera, you should wait for
about one minute until the startup process is over.
Fig1.1 Connect to the AC/DC adapter