Installation Manual
Table Of Contents
- 2.2.1If it is for the first installation, go to "New de
- then tap "Power is on, next step". Here you can ch
- "Connected network Cable" or "Not connected the ne
- -Connected network Cable:
- --Not Connected to the network Cable:
- 2.2.2If the camera has been added successfully before a
- a.You can fill the UID manually, or scan the QR code
- b.Also you can tap "Search nearby devices", the came
- c.Pay attention to the login username and password o
- d.Tap "Confirm add", name your camera and go to the
Topodome Quick Installation Guide QIG-En-V1.0
18
www.topodome.com Tech support email support@topodome.com
7. Add New Device: If the camera is not in the LAN, you
need to directly add the UID to connect, click the
"Input UID" button, then manually enter the UID of
new camera, input right username and password, click
"OK" and the new camera will be added to camera list.
8. Now you have successfully completed the installation
of the camera on CMS software, and then you can
view the camera, or set PTZ,Preset,Image setting etc.
9. For other advanced software settings, such as
Alarm Settings, Video playback, Wi-Fi settings or
record management, please visit Topodome official
website www.topodome.com for more details.
3.3 Login the Camera via Browser in LAN
1. Search the IP address of cameras referred to Fig3.1,
then double-click the camera name and the login page
will pop up in the default browser. You can also enter
the IP address in the address bar of other browsers to
open the login page.
2. The best browser for these cameras is the IE browser
such as IE11 or IE10. Other browsers including Edge,
Firefox and Google Chrome, will stop supporting the
Adobe Flash Player, please refer to manual book.
3. When the login menu pops up, input default username