Installation Manual
Table Of Contents
- 2.2.1If it is for the first installation, go to "New de
- then tap "Power is on, next step". Here you can ch
- "Connected network Cable" or "Not connected the ne
- -Connected network Cable:
- --Not Connected to the network Cable:
- 2.2.2If the camera has been added successfully before a
- a.You can fill the UID manually, or scan the QR code
- b.Also you can tap "Search nearby devices", the came
- c.Pay attention to the login username and password o
- d.Tap "Confirm add", name your camera and go to the
Topodome Quick Installation Guide QIG-En-V1.0
17
www.topodome.com Tech support email support@topodome.com
click "OK" to log in to the software.
4. When the software starts, it will automatically search
and add all cameras in the local area network. If the
default username and password of the camera are still
"admin", the camera will be added automatically; if the
username and password of the camera have been
modified, the software will display "password error",
you need to manually modify the password and
complete the installation.
5. Click the gear icon (Setting button), the device
management window will pop up, where you can
modify the device information or add a new camera
remotely.
6. Modify device information: Click the gear button,
choose camera UID and click "Modify device", then
input new password or username.