Installation Manual
Table Of Contents
- 2.2.1If it is for the first installation, go to "New de
- then tap "Power is on, next step". Here you can ch
- "Connected network Cable" or "Not connected the ne
- -Connected network Cable:
- --Not Connected to the network Cable:
- 2.2.2If the camera has been added successfully before a
- a.You can fill the UID manually, or scan the QR code
- b.Also you can tap "Search nearby devices", the came
- c.Pay attention to the login username and password o
- d.Tap "Confirm add", name your camera and go to the
Topodome Quick Installation Guide QIG-En-V1.0
13
www.topodome.com Tech support email support@topodome.com
Fig2.5 Camera settings
Tap the "Gear Icon" in the camera panel, the function
settings page will pop out, go to the "Change Password"
option, input your new password and tap "Apply".
Caution: ①Changing password or username will force the camera
offline on phones or PCs, users have to login again with a new
password or username. ②If you lost the password or username,
please reset the camera by pressing the reset button 5-10
seconds, then re-install the camera again.
Click here and
enter camera
function settings