Installation Manual
Table Of Contents
- 2.2.1If it is for the first installation, go to "New de
- then tap "Power is on, next step". Here you can ch
- "Connected network Cable" or "Not connected the ne
- -Connected network Cable:
- --Not Connected to the network Cable:
- 2.2.2If the camera has been added successfully before a
- a.You can fill the UID manually, or scan the QR code
- b.Also you can tap "Search nearby devices", the came
- c.Pay attention to the login username and password o
- d.Tap "Confirm add", name your camera and go to the
Topodome Quick Installation Guide QIG-En-V1.0
12
www.topodome.com Tech support email support@topodome.com
is successful, Congratulations!
Fig2.4 Add camera in use
2.3 Change the default Password of the Camera
For security reasons, after the installation is complete, it is
strongly recommended that you modify the default login
password. You can modify it through the mobile App or
through the browser. The mobile APP only allows you to
modify the login password, and the login username and
password can be modified simultaneously on the browser.