Installation Manual
Table Of Contents
- 2.2.1If it is for the first installation, go to "New de
- then tap "Power is on, next step". Here you can ch
- "Connected network Cable" or "Not connected the ne
- -Connected network Cable:
- --Not Connected to the network Cable:
- 2.2.2If the camera has been added successfully before a
- a.You can fill the UID manually, or scan the QR code
- b.Also you can tap "Search nearby devices", the came
- c.Pay attention to the login username and password o
- d.Tap "Confirm add", name your camera and go to the
Topodome Quick Installation Guide QIG-En-V1.0
10
www.topodome.com Tech support email support@topodome.com
b. For Android phones, next step will display "Discover
device hotspots" , and WiFi hotspot "IPCAM-xxxxxx" will
appear in the hotspots list (xxxxxx is same as the UID
middle number, Fig1.3), default password is "01234567".
It is recommended to connect to the hotspot manually.
Fig2.3 Hotspots Connection
c. For Apple phones, next step will display the guide of
how to connect the hotspot step by step. Please switch to
the WLAN Settings of your phone and connect to the
hotspot "IPCAM-xxxxxx" manually(password: "01234567").
Note: ①You will not find any hot spots if the camera has
connected the router with the Ethernet cable. ②If the hotspot
keeps not appearing, please reset the camera and repeat the
operation from the first step.
d. Now return to the CamHiPro and go to the next page ,