Installation Manual
Table Of Contents
- 2.2.1If it is for the first installation, go to "New de
- then tap "Power is on, next step". Here you can ch
- "Connected network Cable" or "Not connected the ne
- -Connected network Cable:
- --Not Connected to the network Cable:
- 2.2.2If the camera has been added successfully before a
- a.You can fill the UID manually, or scan the QR code
- b.Also you can tap "Search nearby devices", the came
- c.Pay attention to the login username and password o
- d.Tap "Confirm add", name your camera and go to the
Topodome Quick Installation Guide QIG-En-V1.0
9
www.topodome.com Tech support email support@topodome.com
f. Now the camera device page will appear, please tap
the Video Windows of the camera and enter the Control
Panel of your camera.
g. In the Control Panel, you can implement functions
such as video recording, screenshots, two-way voice and
image adjustment. If your camera model supports PTZ,
then you can achieve rotation and zoom functions.
--Not Connected to the network Cable:
Important note: In this step, the camera should have an antenna
installed and placed not far from the wireless router.
a. After tapping "Not connected to the network cable",
you have to choose the camera shapes, please tap the
option as below, tap "Go add".
Fig2.2 Choose camera shapes