Quick Start Guide
All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying,
recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner
6
Device installation
There are few options
1. Directly attach mount to device (no cradle in this case)
2. Cradle attached to car mount with different screw length
2 screw hole at the back
Pls use M4 15mm screw if the mount thickness is 9mm.
Pls note that the screw hole depth is only 6mm. Long screw may damge
the PCB inside
2 screw hole at the back
Case 1 – if M4 18mm screw is used, the device will be removable
from cradle
Case 2 – if M4 23mm screw is used, the device will be not
removable from cradle