User Guide
-01-
-02- -03-
INSTALLATION INSTRUCTIONS
SPECIFICATION
USB Rating ............................ Two USB ports with total 4.8 Amps, 5VDC
Wire Terminals .................................................................... #14-#12AWG
Operating Temperature .................................. -4° to 140°F (-20° to 60°C)
USB Compatibility ......USB 1.1/2.0/3.0 devices, including Apple products
Strip Length .............................0.5 inch (Back Wiring), 1 inch (side wiring)
•
Industry's first Dual USB High Speed Charger at 4.8 Amp, 5VDC
•
Charge most compatible electronic device directly without an adapter
•
Tamper-Resistant Shutters provide compliance with 2011 NEC Code
•
Replace a standard duplex receptacle
•
Back and side wire for easy installation
•
Interchangeable USB module(sold separately)
•
A changeable cover part with two USB module is newly designed to
extend product life and match the colors
•
UL listed
DESCRIPTION
FEATURES
TOPGREENER TU11548A/TU12048A is the Industry's first 4.8A,
5VDC, interchangeable dual USB charger with a single tamper
resistant receptacle. Our High Speed USB ports deliver the most
advance charging needs of each device simultaneously and optimizes
the current by a smart chip to reduce charging time. Our High Speed
USB chargers give you the ability to charge virtually any device without
the use of bulky adapters that can be lost or misplaced, while
continuing to power traditional electronics, i.e. lamp or television in the
same receptacle.
Cafeteria
Office
Kitchen
Bedroom
Restaurant
Meeting Room
Living Room
Labs
Salon
Hotel
School
Library
Work Station
Airport
INSTALLATION
SAFETY WARNING
:
Read and understand these
instructions before installation. This device is
intended for installation in accordance with the
National Electrical Code and local regulations. It
is recommended that a qualified electrician perform
this installation. Make sure to turn off the circuit
breaker or fuse(s) and test that the power is off
before wiring the device.
Wiring Diagram:
1.
For retrofit applications, remove wall plate and mounting screws.
2.
Carefully remove existing receptacle from the junction box.
3.
Disconnect wires from the old receptacle.
4.
Connect TU11548A/TU12048A per Wiring Diagram (Figure 1).
5.
Insert straight wires to each appropriate terminal and tighten
screws firmly. Neutral to silver screw and Hot to brass screw.
6.
Mount the TU11548A/TU12048A in the junction box with screws
provided and mount wall plate.
7.
Restore power at circuit breaker.
Figure 1
iPad®
iPad ® Mini
Tablets
Mobile Phones
Blackberry , Android Phones
Windows Phone by HTC
Kindle
TM
, Nook e-reader
iPhone®
iPod®
GPS
Galaxy Tab
TM
Bluetooth
TM
Headsets
Digital Cameras
Other USB compatible products
If the devices combined power requirements exceed the power
capacity of the USB Ports, the charger will automatically protect
your devices.
WARRANTY
TOPGREENER offers 2 years warranty on this product to be
free of defects in material and workmanship. This warranty is
void if this product is installed improperly or in an improper
environment, overloaded, misused, or altered in any manner.
TOPGREENER is not liable for consequential damages arising
out of, or in connection with the use or performance of this
product or other indirect damages with respect to loss of
property, revenue or profit or cost of removal, installation or re-
installation.
Figure 2
May, 2016
TU11548A/TU12048A
Ult
ra High Speed USB Interchangeable
Module Charger 15/20A Receptacle
Receptacle Rating .................................................. 15/20 Amps, 125VAC
APPLICATION
TU21548A/TU22048A
USB15L-CU
USB20L-CU
Interchangeable USB module
Receptacle Dimension .............................................3-3/4”×2-1/4”×3-3/16”
COMPATIBILITY
The Ultra High Speed USB Interchangeable Module Charger
Receptacle compatible with a wide range of electronic devices
including, but not limited to the following:
To replace the
USB module, Use
a flat screwdriver to
pry-off the
interchangeable
module.
Charge Most USB Powered Devices