Operation Manual

7 Recording and Playback
7.6 Formatting the hard disk 77
7.6 Formatting the hard disk
If a new hard disk is installed, it must be formatted before us-
ing. Because the Topfield unit does not recognize unformatted
hard disk. You can delete all contents stored in the hard disk
by formatting it.
Select the Installation > System Recovery > Format Hard Disk
menu, and then select the hard drive you want to format. To
format the built-in hard drive, select the option to Internal;
otherwise to format the external hard drive which is connected
to the digital receiver, select the option to External. With press-
ing the




OK button, you get asked for confirmation. Formatting
will start with the choice of Yes. Select the Installation > Sys-
tem Recovery > Format Hard Disk menu. With pressing the




OK button, you get asked for confirmation. Formatting will
start with the choice of Yes.
NOTE
The hard drive on the digital receiver will be formatted in
the JFS file system.