Operation Manual

3 Service Search
3.2 Copying services 29
services as they are found. It is common for no channels to be
found until quite late in the process. When the scan is com-
plete, you will see a message telling you how many services
have been found. Press the




OK button to save the list.
3.2 Copying services
The digital receiver maintains a separate services list with each
tuner. If a certain service is registered on only one tuner, it
may be impossible to watch one service while recording. You
can copy entries of one tuner’s services list to the other tuner’s
services list to avoid such inconvenience.
To copy service entries, select the Installation > Services Copy
menu. There are three copy options. To copy service entries
of the first tuner to the second tuner’s services list, select the
Tuner 1 to Tuner 2 option. To copy on the contrary, select the
Tuner 2 to Tuner 1 option. To copy reciprocally, select the ALL
option.
3.3 Editing the transponder list
If you failed to receive services of
a transponder because it consists
of wrong data, you can solve it
by correcting the data. Select the
Installation > SAT/TP Edit menu.
To change the data of a trans-
ponder, take the following steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Choose your desired transponder at the Frequency op-
tion.